Magnetic Rubber M18 Battery holder | Toolbox Organiser

Description

IMPORTANT – HOLDER ONLY. This listing is for the 3D-printed holder described below, in the quantity and options selected. Batteries, tools and other equipment shown in use are NOT INCLUDED. Supply your own battery.

INDEPENDENT ACCESSORY – NOT AN OFFICIAL MILWAUKEE ACCESSORY. Brand and model names identify equipment this Layered Works item is intended to fit or hold. Milwaukee did not make, approve or endorse it. Check your exact model, dimensions and fit before use. Do not force a fit or overload the item. We cannot accept responsibility for damage caused by incorrect fit, installation, overloading or misuse where our accessory and description are not at fault. Your statutory rights remain unaffected if our accessory is faulty or misdescribed.

SAFE USE – BATTERY STORAGE ONLY. Designed to keep a compatible battery upright in a stable toolbox drawer or on a flat, horizontal surface. If you choose a magnetic version, use its magnets only on a suitable horizontal steel surface. Remove the battery from any tool before storage in this holder. Do not rely on the magnets to support an attached tool or to hold a battery sideways, overhead or upside down. Magnets help position the item; they are not a rated load or transport restraint. Check the fit and stability before each use and keep fingers clear when fitting magnets.

Magnetic Rubber M18 Battery Holder | Toolbox Organiser

Keep your Milwaukee M18 batteries organised, protected and easy to access with this magnetic rubber M18 battery holder.

This holder is printed in TPU flexible material, giving it extra durability compared with standard rigid prints. The rubber like finish helps protect the battery from knocks, movement and minor drops, making it ideal for toolboxes, tool chests, vans, workshops and garage storage.

Designed as a practical toolbox organiser, it helps stop M18 batteries rolling around loose in drawers while keeping them ready to grab when needed.

Key Features

• Designed to hold Milwaukee M18 batteries
• Printed in TPU flexible material for extra durability
• Rubber like finish helps protect against knocks, movement and minor falls
• Uses strong 32mm magnets with a pulling force of up to 32kg
• Keeps a compatible battery upright in a stable steel toolbox drawer
• Available with 2 magnets or 4 magnets
• Ideal for toolbox drawers, steel tool chests, workbenches, vans and workshops
• Helps keep batteries organised, tidy and easy to access
• Great for mechanics, tradespeople, DIY users and Milwaukee tool owners
• 3D printed and Produced After Purchase
• Available in a range of colours

Product Size

Approximate dimensions:

• 128mm long
• 88.7mm wide
• 40mm high

This size is designed to suit Milwaukee M18 style batteries while keeping the holder compact enough for toolbox drawers and workshop storage setups.

Available Variations

• 2 Magnet Version suitable for general toolbox drawer use, everyday upright battery storage in a stable steel toolbox drawer
• 4 Magnet Version offers extra magnetic grip for users who want a stronger hold on steel surfaces

Please choose the variation that best suits your setup. The 4 magnet version is ideal if you want maximum grip, use heavier tools, or plan to use the holder in a van, mobile toolbox or busy workshop environment.

Magnet Details

• Magnet size: 32mm
• Pulling force: up to 32kg per magnet
• 2 magnet version includes 2 magnets fitted into the holder
• 4 magnet version includes 4 magnets fitted into the holder

The magnets help organised the holder to suitable steel surfaces such as toolbox drawers, steel workbenches, metal shelving and tool chests.

The magnets help position a compatible M18 battery upright in a stable steel toolbox drawer. Remove the battery from any tool before storage; do not use this holder to support an attached tool.

Please note: magnetic hold depends on the steel surface, tool weight, battery size, surface angle and general working conditions. Always test the hold carefully before leaving any tool unsupported.

Please note: magnets will not stick to plastic, aluminium, wood or non magnetic surfaces.

Why Choose A TPU Magnetic Battery Holder?

Standard hard plastic holders can work well, but TPU gives this holder a more flexible and 3D printed feel. It is a great option if you want extra protection for your batteries and a softer storage solution inside your toolbox drawer.

Ideal for:

• Milwaukee M18 battery storage
• Toolbox drawer organisation
• Workshop tool storage
• Garage storage
• Mobile mechanic vans
• Tradespeople using cordless Milwaukee tools
• DIY users and home workshop setups
• Keeping charged and spare batteries separated and easy to find
• Keeping a compatible battery upright in a stable steel toolbox drawer

What’s Included

• 1 x magnetic rubber M18 battery holder
• 32mm magnets fitted according to your selected variation

Please note: battery, tools and toolbox are not included. Any photos showing tools or batteries are for display and size example only.

Produced After Purchase

This item is 3D printed and produced after purchase.

Small layer lines, slight surface marks or minor colour shade differences may be visible due to the 3D printing process. These do not affect normal use and are part of the nature of 3D printed products.

As this product is printed in TPU, the finish may look and feel slightly different to standard rigid 3D printed parts. This is normal for flexible material.

Custom Colours And Custom Prints

If you would like a different colour, a custom size or something else 3D printed, please contact us before ordering.

Many of our products are created from customer requests, so we are happy to discuss custom tool holders, battery holders, organisers and workshop accessories.

Please Check Before Ordering

• Please check your battery type and toolbox drawer space before purchasing
• This holder is designed for Milwaukee M18 style batteries
• This listing is for the holder only
• Battery, tools and toolbox are not included
• Magnetic strength depends on the surface used
• Best performance is on clean, flat steel surfaces
• Magnets will not stick to plastic, aluminium, wood or non magnetic surfaces
• Although the magnets are strong, always test the hold safely before relying on it
• Do not place tools where falling could cause damage or injury
• This product is designed as a storage organiser only
• It should not be used to organised batteries or tools during transport without additional checks
• Colours may appear slightly different depending on screen settings and filament availability

As this item is Produced After Purchase, please make sure you check compatibility, choose the correct magnet option and select the correct colour before purchasing.