DeWalt Circular Saw Wall Mount | Workshop Tool Holder & Organiser

Description

IMPORTANT – HOLDER ONLY. This listing is for the 3D-printed holder described below, in the quantity and options selected. Tools, batteries, sockets, bits and other items shown in use are NOT INCLUDED. Supply your own equipment.

INDEPENDENT ACCESSORY – NOT AN OFFICIAL DEWALT ACCESSORY. Brand and model names identify equipment this Layered Works item is intended to fit or hold. DeWalt did not make, approve or endorse it. Check your exact model, dimensions and fit before use. Do not force a fit or overload the item. We cannot accept responsibility for damage caused by incorrect fit, installation, overloading or misuse where our accessory and description are not at fault. Your statutory rights remain unaffected if our accessory is faulty or misdescribed.

SAFE MOUNTING. Use fixings and a wall or support suitable for the combined weight of this holder and its contents; supplied fixings may not suit every surface. Check for hidden services before drilling. Confirm the holder is secure and the stored item cannot fall. Do not overload it or mount it over people or valuables.

DeWalt Circular Saw Wall Mount | DCS391N Workshop Tool Holder & Organiser

Keep your compatible DeWalt 18V circular saw organised, protected and easy to access with this practical wall-mounted workshop tool holder.

Designed specifically around the DeWalt DCS391N 18V circular saw, this holder provides a dedicated storage position for the tool and helps free up valuable workbench, shelf and toolbox space.

The mount features three recessed pocket fixing holes measuring approximately 6mm in diameter. It is supplied with 4 screws and 4 wall plugs for installation on a suitable surface.

Key Features

• Designed for the DeWalt DCS391N 18V circular saw
• Wall-mounted design keeps the saw off workbenches and floors
• Provides a dedicated storage position for your circular saw
• Helps create a cleaner and more organised workshop
• Features 3 recessed pocket fixing holes
• Each fixing hole measures approximately 6mm in diameter
• Supplied with 4 screws and 4 wall plugs
• Suitable for garages, workshops, sheds, tool rooms and trade vans
• Keeps the tool visible and ready to access
• Available in multiple colours
• 3D printed and made to order

Tool Compatibility

• Brand platform: DeWalt 18V XR
• Designed for: DeWalt DCS391N circular saw
• Storage position: wall mounted
• Fixing holes: 3 recessed pocket holes
• Fixing-hole diameter: approximately 6mm

This mount has been designed around the shape and dimensions of the DeWalt DCS391N. Compatibility with other DeWalt circular saws, different model generations or third-party tools cannot be guaranteed.

Please check the model number on your circular saw before ordering.

Wall-Mounted Workshop Storage

Circular saws can take up a considerable amount of space when stored on a shelf, workbench or inside a toolbox. This holder allows the saw to be stored on a suitable vertical surface, helping you make better use of your available workshop space.

• Helps free up workbench and shelf space
• Keeps the circular saw in a dedicated location
• Reduces loose tools and workshop clutter
• Makes the saw quicker to locate when required
• Helps prevent the tool being knocked over during storage
• Creates a tidy and professional tool-storage layout

Recessed Pocket Fixing Holes

The holder is manufactured with three recessed pocket holes for wall installation. Each hole measures approximately 6mm in diameter.

The recessed design helps position the fixing heads within the mount so they do not unnecessarily interfere with the stored tool.

• Three mounting positions help distribute the load
• Recessed holes provide a cleaner installed appearance
• Suitable for secure installation using appropriate wall fixings
• Fixings should be tightened evenly without overtightening

Installation

• Choose a secure and easily accessible mounting position
• Hold the mount against the wall and check that it is level
• Mark the three fixing-hole positions
• Drill suitable pilot holes where required
• Insert appropriate wall plugs into compatible surfaces
• Secure the holder using suitable screws
• Tighten the fixings evenly without overtightening
• Check that the mount is secure before adding the circular saw
• Place the saw into the holder and confirm that it is correctly seated

Please note: the supplied screws and wall plugs may not be suitable for every mounting surface. Plasterboard, hollow walls, timber, metal panels and other surfaces may require different fixings.

Always select fixings that are suitable for the wall material and capable of supporting the combined weight of the mount and circular saw.

Suitable For

• DeWalt DCS391N circular saw storage
• DeWalt 18V XR tool organisation
• Workshop wall storage
• Garage tool organisation
• Shed and utility-room storage
• Trade van storage installations
• Tool rooms and maintenance areas
• Carpenters and joiners
• Builders and construction professionals
• Tradespeople and DIY users

Benefits of Using This Holder

• Dedicated storage: gives your circular saw its own wall-mounted position
• Improved organisation: reduces loose tools and workshop clutter
• Space saving: frees up shelves, drawers and workbench space
• Easy access: keeps the saw visible and ready to use
• Secure installation: three recessed fixing holes provide multiple mounting points
• Supplied fixings: includes screws and wall plugs for compatible surfaces
• Multiple colours: choose a colour to complement your workshop setup

What’s Included

• 1 x DeWalt DCS391N circular saw wall mount in your selected colour
• 4 x screws
• 4 x wall plugs

Please note: circular saw, battery, blade, charger and other tools or accessories are not included. Any photographs showing equipment are for display and compatibility examples only.

Important Safety Information

• Confirm that your circular saw is the compatible DCS391N model
• Do not force an incompatible tool into the holder
• Remove the battery before placing the saw into storage where appropriate
• Make sure the blade has completely stopped before storing the tool
• Position the saw so the blade and cutting edges cannot cause injury
• Install the mount on a strong and suitable surface
• Use fixings appropriate for the wall material and expected load
• Do not mount the holder above areas where people regularly stand or work
• Make sure the saw is fully seated before releasing it
• Check the mount and wall fixings regularly
• Stop using the holder if it becomes cracked, loose or damaged
• This product is a storage accessory and is not safety equipment

Made to Order

This item is 3D printed and made to order.

Small layer lines, slight surface marks, minor texture differences or colour variations may be visible due to the 3D printing process. These are normal characteristics of 3D printed products and do not affect normal use.

Colour Options

The wall mount will be supplied in the colour selected from the variation menu.

Colours may appear slightly different in person due to lighting, screen settings and filament batches.

Custom Colours and Custom Prints

If you require another colour, a holder for a different circular saw or another item 3D printed, please contact us before ordering.

Many of our products are created from customer requests, so we are happy to discuss custom power-tool holders, battery mounts, wall-storage systems and workshop organisers.

Please Check Before Ordering

• This holder is designed specifically around the DeWalt DCS391N 18V circular saw
• Please verify the model number on your tool before purchasing
• Compatibility with other DeWalt circular saws cannot be guaranteed
• The holder has 3 recessed pocket fixing holes measuring approximately 6mm in diameter
• The listing includes 4 screws and 4 wall plugs
• The supplied fixings may not be suitable for every wall type
• Alternative fixings may be required for plasterboard, timber, metal or hollow walls
• The circular saw, battery and charger are not included
• Install the holder where a falling tool cannot cause injury or damage
• Inspect the mount and fixings regularly
• This item is not manufactured by, endorsed by or affiliated with DeWalt
• Colours may vary slightly because of screen settings and filament availability

As this item is made to order, please check your circular saw model and select your preferred colour before purchasing.

Order Yours Today

Keep your DeWalt circular saw neatly stored and ready for your next project with this DCS391N-compatible wall-mounted workshop tool holder, supplied with screws and wall plugs and available in multiple colours.