10-Socket 1/2-Inch Drive Portable Magnetic Socket Tray

Description

Keep up to 10 1/2-inch drive sockets together and ready to carry to the job. The broad tray gives each socket its own square-drive post while four magnets help hold the organiser on a suitable steel surface.

Compatibility and fitment

Holds 10 sockets with 1/2-inch square-drive posts. Check the drive size before ordering; socket outside diameters can vary, but the tray locates each socket by its drive square.

What is included

One printed portable socket tray with 10 posts and four 12 × 3 mm magnets. Sockets, ratchets and tools are not included.

Approximate dimensions

Approximately 200 × 90 × 17.5 mm.

Magnetic use

For best performance, place the tray on a clean, flat ferrous-steel surface. Magnetic holding force varies with surface thickness, paint, dirt, orientation and load.

Finish and colour

Printed to order in a choice of nine colours. The selected colour applies to the printed holder; hardware and any items shown for demonstration retain their normal finish.

Important information

• Tools, batteries, sockets, calipers and other accessories shown in the photographs are not included unless expressly stated.
• Please compare your item with the photographs, dimensions and compatibility details before ordering. Model revisions and casing differences can affect fit.
• This is a made-to-order 3D-printed item. Fine layer lines, seam marks and small cosmetic variations are normal and do not affect its intended use.
• Use fixings suitable for the mounting surface and check the product is secure before loading it. Do not overload, modify or use a damaged holder.
• Installation and use are the customer’s responsibility. To the fullest extent permitted by law, Layered Works accepts no responsibility for loss, damage or injury caused by incorrect installation, unsuitable fixings or surfaces, overloading, modification or misuse. This does not affect your statutory rights.