Makita 18V Tool Wall Mount Holder | Belt Clip Compatible | Multiple Colours

Description

IMPORTANT – HOLDER ONLY. This listing is for the 3D-printed holder described below, in the quantity and options selected. Tools, batteries, sockets, bits and other items shown in use are NOT INCLUDED. Supply your own equipment.

INDEPENDENT ACCESSORY – NOT AN OFFICIAL MAKITA ACCESSORY. Brand and model names identify equipment this Layered Works item is intended to fit or hold. Makita did not make, approve or endorse it. Check your exact model, dimensions and fit before use. Do not force a fit or overload the item. We cannot accept responsibility for damage caused by incorrect fit, installation, overloading or misuse where our accessory and description are not at fault. Your statutory rights remain unaffected if our accessory is faulty or misdescribed.

SAFE MOUNTING. Use fixings and a wall or support suitable for the combined weight of this holder and its contents; supplied fixings may not suit every surface. Check for hidden services before drilling. Confirm the holder is secure and the stored item cannot fall. Do not overload it or mount it over people or valuables.

Makita 18V Tool Wall Mount Holder | Standard & Belt Clip Versions | Multiple Colours

Keep your Makita 18V power tool organised, visible and easy to access with this 3D printed wall mounted tool holder. Designed for workshops, garages, sheds, vans and tool storage areas, this holder gives your drill, impact driver or compatible tool body a dedicated storage position while freeing up valuable bench, shelf and drawer space.

This listing is available in 2 different versions. Choose the slimmer standard holder for compatible tools without a belt clip, or select the extended version when additional wall clearance is needed for a fitted belt clip.

Key Features

• Designed for compatible Makita 18V tool bodies
• Suitable for drills, impact drivers and similar compatible cordless tools
• Available in 2 holder styles
• Standard slim version for tools without an obstructing belt clip
• Extended belt clip version provides additional clearance from the wall
• Compatible tools slide into the holder using the battery mounting area
• Wall mounted design for workshops, garages, sheds and vans
• Keeps tools visible, organised and easy to access
• Helps free up benches, shelves, floors and drawer space
• Supplied with 4 screws and 4 wall plugs
• Available in multiple colours
• 3D printed and made to order

Available Versions

Option 1: Standard Slim Holder

• Compact holder with a slimmer overall profile
• Designed for compatible Makita 18V tools without a belt clip obstructing the mount
• Suitable where less clearance from the wall is required
• Approximate dimensions: 75mm wide x 112mm deep x 28.3mm high
• Ideal for compact workshop and van storage layouts

Option 2: Extended Belt Clip Holder

• Longer mounting base provides additional clearance from the wall
• Designed to accommodate many compatible tools with the belt clip still fitted
• Helps avoid repeatedly removing and refitting the belt clip
• Approximate dimensions: 75mm wide x 112mm deep x 53.3mm high
• Please check the shape and position of your belt clip before ordering

Please select the correct version before purchasing. The slim version may not fit correctly if your tool has a belt clip that contacts the wall or holder. The extended version provides more clearance but cannot be guaranteed to accommodate every belt clip design.

Standard Slim Design

The standard version uses a lower profile base for a compact wall mounted setup. It is suitable for compatible Makita tools where no belt clip or accessory interferes with the wall or mounting surface.

• Smaller overall profile
• Uses less wall clearance
• Suitable for tools without an obstructing belt clip
• Ideal when several holders are being installed together
• Creates a clean and compact tool storage layout

Extended Belt Clip Compatible Design

Standard tool holders can interfere with a fitted belt clip because the clip may contact the wall or mounting surface. The extended version uses a longer base to move the tool further away from the wall, giving compatible belt clips additional clearance.

• Extended base accommodates many fitted Makita belt clips
• Helps prevent the belt clip pressing against the wall
• Allows compatible tools to remain ready for site use
• Reduces the need to repeatedly remove and refit the clip
• Suitable where additional wall clearance is required

Please check the position, shape and size of your belt clip before ordering. Belt clips, tool bodies and accessory layouts can vary between models.

Tool Compatibility

• Tool platform: Makita 18V
• Tool style: compatible slide battery cordless tools
• Suitable examples: drills, impact drivers and similar tool bodies
• Capacity: holds 1 compatible tool body
• Holder choices: standard slim or extended belt clip version

The holder connects to the battery mounting area on the tool. Fit may vary depending on the model, generation, base shape, belt clip position and any accessories fitted.

This product is not guaranteed to fit every Makita 18V tool. Please check your tool carefully before ordering and do not force an incompatible tool into the holder.

Wall Mounted Tool Storage

Power tools can quickly take up valuable space when stored loose on benches, shelves or floors. This holder uses vertical wall space to create a cleaner and more efficient tool storage area.

• Helps reduce loose power tools around the workshop
• Keeps frequently used tools visible and ready to grab
• Makes use of otherwise unused wall space
• Suitable for installing several holders side by side
• Creates a cleaner and more professional storage setup

Installation Information

Each holder is supplied with 4 screws and 4 wall plugs for installation.

• Choose a strong and suitable mounting surface
• Install the holder level and securely
• Use all appropriate mounting points
• Allow sufficient space around the tool and any fitted belt clip
• Check that the tool sits securely before regular use
• Inspect the holder and fixings regularly for movement or damage

Please note: the supplied screws and wall plugs may not be suitable for every mounting surface. Timber, masonry, plasterboard, van lining and storage panels may require different or stronger fixings. The buyer is responsible for checking the mounting surface and using suitable replacement hardware where required.

Suitable For

• Makita 18V drill storage
• Makita 18V impact driver storage
• Compatible Makita power tool organisation
• Tools with or without compatible belt clips
• Workshop wall organisation
• Garage and shed storage
• Van and mobile workshop organisation
• Tool boards and storage panels
• Tradespeople using Makita cordless tools
• DIY users and home workshops

What’s Included

• 1 x Makita 18V tool wall mount holder in your selected version and colour
• 4 x screws
• 4 x wall plugs

Please note: power tool, battery, belt clip, charger, drill bit and other accessories are not included. Any photographs showing tools or accessories are for display and compatibility examples only.

Important Safety Information

• Use suitable fixings for your wall or mounting surface
• The supplied fixings may not be appropriate for every surface
• Do not mount the holder to weak, damaged or unsuitable material
• Make sure the holder is securely installed before adding the tool
• Confirm that the tool is fully seated before releasing it
• Do not store a tool that feels loose, unstable or incompatible
• Check that a fitted belt clip does not obstruct correct tool engagement
• Do not use the slim holder if the belt clip presses against the wall or prevents the tool seating correctly
• Remove long drill bits or sharp accessories before storage where practical
• Do not position the holder where a falling tool could cause injury or damage
• Inspect the holder and fixings regularly for cracks, wear or movement
• Stop using the holder immediately if it becomes cracked, loose or damaged
• Do not exceed the safe capacity of the wall or mounting surface
• This product is a storage organiser only and is not safety equipment

Made To Order

This item is 3D printed and made to order.

Small layer lines, slight surface marks, minor texture differences or colour shade variations may be visible due to the 3D printing process. These are normal characteristics of 3D printed products and do not affect normal use.

Colour Options

The holder will be supplied in the colour selected from the variation menu.

Colours may appear slightly different in person due to lighting, screen settings and filament batches.

Custom Colours And Custom Prints

If you would like a different colour, custom size or another item 3D printed, please contact us before ordering.

Many of our products are created from customer requests, so we are happy to discuss custom power tool holders, battery mounts, wall organisers, toolbox inserts and workshop storage accessories.

Please Check Before Ordering

• Please select either the standard slim version or the extended belt clip version
• Please check your exact Makita tool model before purchasing
• Please check the position and size of any fitted belt clip
• The standard slim version is intended for tools without an obstructing belt clip
• The extended version provides extra clearance but may not accommodate every belt clip design
• Please compare your available mounting space with the listed dimensions
• This listing includes the selected holder, 4 screws and 4 wall plugs
• Power tool, battery, belt clip, charger and accessories are not included
• Fit may vary depending on tool model, generation, base design and accessories
• Do not force an incompatible tool into the holder
• The supplied screws and wall plugs may not suit every mounting surface
• The buyer is responsible for selecting suitable replacement fixings where required
• Always confirm the holder is securely mounted before adding the tool
• Do not use the holder if it becomes cracked, damaged or loose
• This product is designed as a storage organiser only
• Colours may vary slightly depending on screen settings and filament availability
• This item is not manufactured by, endorsed by or affiliated with Makita

As this item is made to order, please check compatibility, choose the correct holder version, confirm your mounting location and select the correct colour before purchasing.

Order Yours Today

Keep your Makita cordless tool organised with a choice of standard slim or extended belt clip compatible wall mount holders, supplied with mounting hardware and available in multiple colours.

Design Attribution & Licence

This product is a 3D print based on “Makita Wall Mounts / Holders for Battery and Tools (18V/14.4V LXT)” by GunSmoker on THINGIVERSE.

Licensed under Creative Commons Attribution 4.0 International.

Changes: Two holder versions are offered. One retains a slimmer standard profile, while the other uses an extended mounting base to provide additional clearance for compatible tool belt clips. Technical preparation was also completed for 3D printing.

Printed and sold independently by Layered Works. The original designer does not endorse or sponsor this product.