Halfords Advanced 1/4″ Shallow Socket Holder (Holds 10) | Magnetic Organiser

Description

IMPORTANT – HOLDER ONLY. This listing is for the 3D-printed holder described below, in the quantity and options selected. Tools, batteries, sockets, bits and other items shown in use are NOT INCLUDED. Supply your own equipment.

INDEPENDENT ACCESSORY – NOT AN OFFICIAL HALFORDS ADVANCED ACCESSORY. Brand and model names identify equipment this Layered Works item is intended to fit or hold. Halfords Advanced did not make, approve or endorse it. Check your exact model, dimensions and fit before use. Do not force a fit or overload the item. We cannot accept responsibility for damage caused by incorrect fit, installation, overloading or misuse where our accessory and description are not at fault. Your statutory rights remain unaffected if our accessory is faulty or misdescribed.

Halfords Advanced 1/4″ Shallow Socket Holder (Holds 10) | Magnetic Organiser

Keep your Halfords Advanced 1/4″ shallow sockets neat, organised and easy to access with this magnetic socket holder. Designed around the 1/4″ shallow sockets from the Halfords Advanced 100 Piece Socket Set, this organiser keeps all 10 sockets lined up, visible and ready to grab when needed.

1/4″ sockets are small and easy to misplace when stored loose in a drawer. They can roll around, get mixed in with other socket sizes and slow you down when trying to find the correct one. This holder gives each socket its own dedicated position, helping keep your toolbox cleaner, tidier and easier to use.

Key Features

• Designed for the Halfords Advanced 100 Piece Socket Set
• Made for the 1/4″ drive shallow metric sockets from the kit
• Holds 10 shallow sockets
• Designed for socket sizes 4mm to 13mm
• Compact rail design for toolbox drawers and small storage spaces
• Includes 2 x 12x3mm magnets fitted into the base
• Magnetic base helps keep the holder positioned inside suitable steel toolbox drawers
• helps reduce loose sockets in drawers in drawers
• Keeps sockets visible, tidy and easy to identify
• Ideal for toolboxes, steel tool chests, workbenches, vans and workshops
• Great for mechanics, technicians, tradespeople, garages and DIY users
• 3D printed and Produced After Purchase
• Available in a range of colours

Product Size

Approximate dimensions:

• 170.7mm long
• 30mm wide
• 18mm high

The slim rail design is ideal for keeping the 1/4″ shallow socket range organised without taking up unnecessary drawer space.

Socket Sizes This Holder Is Designed To Fit

This organiser is designed to hold the following 1/4″ drive shallow metric sockets from the Halfords Advanced 100 Piece Socket Set:

• 4mm socket
• 5mm socket
• 6mm socket
• 7mm socket
• 8mm socket
• 9mm socket
• 10mm socket
• 11mm socket
• 12mm socket
• 13mm socket

Capacity And Compatibility

• Capacity: holds 10 sockets
• Drive size: 1/4″ drive
• Socket type: shallow metric sockets
• Socket range: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm and 13mm
• Designed for: Halfords Advanced 100 Piece Socket Set shallow sockets
• Placement: toolbox drawers, steel tool chests, vans, workbenches and workshop storage

Please check your socket sizes before ordering, as fit may vary depending on socket version, socket style and manufacturing tolerances.

Magnet Details

• Magnet quantity: 2 magnets
• Magnet size: 12x3mm
• Magnets are fitted into the base of the holder
• Designed to help keep the holder positioned inside steel toolbox drawers and on suitable metal surfaces
• Magnets are in the base only, not individually fitted to each socket slot

The magnetic base helps reduce movement when opening and closing drawers, keeping your 1/4″ shallow sockets organised and easier to access.

Please note: magnetic hold depends on the surface used. Best performance is on clean, flat steel surfaces. Magnets will not stick to plastic, aluminium, wood or non magnetic surfaces. Drawer liners, surface thickness and surface condition may affect magnetic hold.

Why Use A 1/4″ Shallow Socket Holder?

The 1/4″ shallow sockets from the Halfords Advanced 100 piece set are ideal for smaller fasteners and everyday jobs, but because they are small, they can easily get lost in a busy drawer.

This holder keeps the full 4mm to 13mm 1/4″ shallow socket range together in one tidy rail, making it quicker to find the size you need and helping keep your toolbox drawer organised.

Suitable For

• Halfords Advanced 100 Piece Socket Set socket storage
• 1/4″ drive shallow socket organisation
• 4mm to 13mm socket storage
• Toolbox drawer organisation
• Socket set accessory storage
• Garage and workshop storage
• Van tool storage
• Mechanics, technicians, tradespeople and DIY users

Benefits Of Using This Holder

• Better organisation: keeps 1/4″ shallow sockets neatly lined up
• Faster access: quickly find the socket size you need
• Full socket range: holds all 10 shallow 1/4″ sockets from the kit
• Compact design: helps save toolbox drawer space
• Magnetic base: helps keep the holder positioned on suitable steel surfaces
• Cleaner drawer setup: reduces loose sockets and toolbox clutter
• tidy storage: gives your toolbox a tidier, more organised look
• practical gift idea: ideal for mechanics, DIY users and tool enthusiasts

What’s Included

• 1 x Halfords Advanced 1/4″ shallow socket holder
• 2 x 12x3mm magnets fitted into the base

Please note: sockets, ratchets, tools, toolbox and accessories are not included. This listing is for the holder only. Any photos showing sockets or tools are for display and size example only.

Produced After Purchase

This item is 3D printed and produced after purchase.

Small layer lines, slight surface marks or minor colour shade differences may be visible due to the 3D printing process. These do not affect normal use and are part of the nature of 3D printed products.

Custom Colours And Custom Prints

If you would like a different colour, a custom size or something else 3D printed, please contact us before ordering.

Many of our products are created from customer requests, so we are happy to discuss custom socket holders, toolbox organisers, drawer inserts and workshop accessories.

Please Check Before Ordering

• This holder is designed around the 1/4″ shallow sockets from the Halfords Advanced 100 Piece Socket Set
• Please check your toolkit version before purchasing
• This listing is for the holder only
• Sockets, ratchets, tools, toolbox and accessories are not included
• Fit may vary depending on socket version, socket style and manufacturing tolerances
• Magnetic strength depends on the surface used
• Best performance is on clean, flat steel surfaces
• Magnets will not stick to plastic, aluminium, wood or non magnetic surfaces
• This product is designed as a storage organiser only
• It should not be used to organised tools during transport without additional checks
• Do not place tools where falling could cause injury or damage
• Colours may appear slightly different depending on screen settings and filament availability
• This item is not manufactured by, endorsed by or affiliated with Halfords

As this item is Produced After Purchase, please make sure you check compatibility and select the correct colour before purchasing.

Order Yours Today

Upgrade your toolbox with a Halfords Advanced 1/4″ shallow socket holder and keep your 4mm to 13mm sockets organised, visible and ready to use.