Description
1/2″ Torx Socket Holder | Magnetic Socket Organiser | Drawer Organiser
Keep your 1/2″ Torx sockets neat, organised and easy to access with this magnetic 1/2 Torx socket organiser rail. Designed for toolbox drawers, steel tool chests, workbenches, vans and workshop storage, this holder helps reduce loose sockets in drawers and keeps each socket visible when needed.
Available in a wide range of storage sizes, this rail is ideal whether you only need to organise a small set or want a longer holder for a larger Torx socket collection.
Each holder is designed with a slim rail layout, making it easy to place inside toolbox drawers while keeping your sockets organised and ready to grab.
Key Features
- Designed for 1/2″ Torx sockets
- Available in sizes holding from 4 sockets up to 15 sockets
- Holds 4 to 7 sockets include 2 x 12x3mm magnets in the base
- Holds 8 sockets and above include 3 x 12x3mm magnets in the base
- Holds 11 sockets and above are split into 2 rail sections that snap together
- Split design is used because the full rail is too long for the printing bed
- Magnetic base helps keep the holder organised on suitable steel surfaces
- Keeps sockets organised, visible and easy to select
- helps reduce loose sockets in drawers in drawers
- Ideal for toolbox drawers, steel tool chests, workbenches, vans and workshops
- Great for mechanics, technicians, tradespeople and DIY users
- Slim rail design helps save toolbox space
- 3D printed and Produced After Purchase
- Available in a range of colours
Available Sizes
Holds 4 Sockets
- Approximate size: 128.7mm long x 45mm wide x 23mm high
- Magnets included: 2 x 12x3mm magnets
Holds 5 Sockets
- Approximate size: 160.7mm long x 45mm wide x 23mm high
- Magnets included: 2 x 12x3mm magnets
Holds 6 Sockets
- Approximate size: 192.7mm long x 45mm wide x 23mm high
- Magnets included: 2 x 12x3mm magnets
Holds 7 Sockets
- Approximate size: 224.7mm long x 45mm wide x 23mm high
- Magnets included: 2 x 12x3mm magnets
Holds 8 Sockets
- Approximate size: 256.7mm long x 45mm wide x 23mm high
- Magnets included: 3 x 12x3mm magnets
Holds 9 Sockets
- Approximate size: 288.7mm long x 45mm wide x 23mm high
- Magnets included: 3 x 12x3mm magnets
Holds 10 Sockets
- Approximate size: 320.7mm long x 45mm wide x 23mm high
- Magnets included: 3 x 12x3mm magnets
Holds 11 Sockets
- Approximate size: 352.7mm long x 45mm wide x 23mm high
- Magnets included: 3 x 12x3mm magnets
- Split rail design: supplied in 2 sections that snap together because the full rail is too long for the printing bed
Holds 12 Sockets
- Approximate size: 384.7mm long x 45mm wide x 23mm high
- Magnets included: 3 x 12x3mm magnets
- Split rail design: supplied in 2 sections that snap together because the full rail is too long for the printing bed
Holds 13 Sockets
- Approximate size: 416.7mm long x 45mm wide x 23mm high
- Magnets included: 3 x 12x3mm magnets
- Split rail design: supplied in 2 sections that snap together because the full rail is too long for the printing bed
Holds 14 Sockets
- Approximate size: 448.7mm long x 45mm wide x 23mm high
- Magnets included: 3 x 12x3mm magnets
- Split rail design: supplied in 2 sections that snap together because the full rail is too long for the printing bed
Holds 15 Sockets
- Approximate size: 480.7mm long x 45mm wide x 23mm high
- Magnets included: 3 x 12x3mm magnets
- Split rail design: supplied in 2 sections that snap together because the full rail is too long for the printing bed
Magnet Details
- Holds 4 to 7 sockets: includes 2 x 12x3mm magnets in the base
- Holds 8 sockets and above: includes 3 x 12x3mm magnets in the base
- Magnets are fitted into the base of the holder
- Designed to help keep the holder positioned inside steel toolbox drawers and on suitable metal surfaces
The magnetic base helps reduce movement when opening and closing drawers, keeping your Torx sockets organised and easier to access.
Please note: magnetic hold depends on the surface used. Best performance is on clean, flat steel surfaces. Magnets will not stick to plastic, aluminium, wood or non magnetic surfaces.
Split Rail Design
For the larger 11 socket, 12 socket, 13 socket, 14 socket and 15 socket versions, the holder is supplied in 2 rail sections that snap together. This is because the full rail is too long for the printing bed.
Once joined, the rail gives you the same organised storage layout while keeping the design practical to manufacture and use.
Why Use A 1/2 Torx Socket Holder?
Torx sockets can easily get mixed up with other sockets when stored loose in a drawer. This holder gives each socket its own place, helping you quickly identify the size you need and keeping your toolbox setup much cleaner.
Ideal for:
- 1/2″ Torx socket storage
- Toolbox drawer organisation
- Workshop tool storage
- Garage storage
- Van tool storage
- Mechanics and technicians
- Tradespeople and DIY users
- Keeping Torx socket sets tidy and easy to access
Benefits Of Using This Socket Holder
- Better organisation: keeps sockets lined up neatly
- Faster access: quickly find the socket you need
- Magnetic base: helps keep the organiser in place on suitable steel surfaces
- Choice of sizes: available from 4 socket capacity up to 15 socket capacity
- Split rail on larger versions: 11 socket and above snap together for a practical longer rail
- Space saving design: slim rail layout fits neatly inside toolbox drawers
- Cleaner toolbox setup: helps reduce loose sockets and drawer clutter
- Practical workshop storage: suitable for garages, vans, workshops and tool chests
What’s Included
- 1 x 1/2″ Torx socket holder in your selected size
- Magnets fitted into the base according to your selected size
Please note: sockets, tools, toolbox and accessories are not included. Any photos showing sockets or tools are for display and size example only.
Produced After Purchase
This item is 3D printed and produced after purchase.
Small layer lines, slight surface marks or minor colour shade differences may be visible due to the 3D printing process. These do not affect normal use and are part of the nature of 3D printed products.
Custom Colours And Custom Prints
If you would like a different colour, a custom size or something else 3D printed, please contact us before ordering.
Many of our products are created from customer requests, so we are happy to discuss custom socket holders, Torx organisers, drawer inserts and workshop accessories.
Please Check Before Ordering
- Please check your socket sizes before purchasing
- Please make sure you choose the correct holder capacity for your socket set
- This holder is designed for 1/2″ Torx sockets
- The 11 socket version and above are supplied in 2 rail sections that snap together
- This listing is for the holder only
- Sockets, tools, toolbox and accessories are not included
- Fit may vary depending on socket brand, socket depth and socket style
- Magnetic strength depends on the surface used
- Best performance is on clean, flat steel surfaces
- Magnets will not stick to plastic, aluminium, wood or non magnetic surfaces
- This product is designed as a storage organiser only
- It should not be used to organised tools during transport without additional checks
- Do not place tools where falling could cause injury or damage
- Colours may appear slightly different depending on screen settings and filament availability
As this item is Produced After Purchase, please make sure you check compatibility, choose the correct size option and select the correct colour before purchasing.
Order Yours Today
Upgrade your toolbox with a magnetic 1/2″ Torx socket holder and keep your sockets organised, organised and ready to use. Choose the holder capacity that best matches your socket set and toolbox layout.
